廠房降溫 逃生口 通風球 喇叭扇
最新消息
免電力通風器轉動原理 ※藉由室內熱氣上升,熱氣自24片葉片縫隙排出,驅動主機球體運轉。 ...
2013-05-10
  1.在屋頂欲安裝處開孔 2.將底座圓孔處和開孔處接合 3.底座...
2013-05-10
訪客計數器
最新消息
排序方式:
The rotation principle of wind driven turbo ventilators
免電力通風器轉動原理 ※藉由室內熱氣上升,熱氣自24片葉片縫隙排出,驅動主機球體運轉。 ※室內氣流由內往外排出,室內外溫差壓及氣壓差,產生動能。 ※戶外微風形成壓力使主機球體驅動,完全不需電力。 產品特性: 堅固耐用:多項專利技術,使主機球體品質更加優異。 耐蝕性:可選用日本進口鎂鋁鋅超耐蝕材質、不銹鋼304材質。 軸承:採用德國原裝進口,軸承加防塵套,轉動非常滑順,微風即可轉運。 防雨性:利用主機球體運轉時所產生的離心力,將雨水甩開。加上葉片外端的            防雨弧形,更達到防雨效果。 零噪音:以自然風力達到運轉效果,杜絕使用馬達動力所產生噪音之疑慮。 防曬:24小時運轉的主機球體,使灰塵不易附著,不需清洗。 採光:葉片與葉片間之縫隙,可使光線透入室內,可增加約20%之照明度,節省         電費開銷,是綠建材的最佳選用產品。   ※The sphere could work through hot air rise inside and hot air discharge from the chink of twenty-      four blades. ※The power come from the air discharge from inside to outside and the temperature range and          pressure difference    between inside and outside. ※Breeze could bring air pressure to drive the sphere. Therefore, ventilators run without consuming    electricity.   Characteristic ●  Firm and durable: the quality is more outstanding of the sphere from many patented technology. ● Corrosion proof: the materials are SuperDyma® which import from Japan and stainless steel 304. ● Bearing: the bearings are imported with original packing from Germany. Besides, the bearings add to dust covers so that the sphere runs smoothly. And breezes just drive the sphere. ● Rainproof: when the sphere runs, it removes rain. Because of centrifugal force from the sphere running. And the rainproof arcs of outside blades increase more effect. ● No noise: Natural wind could drive the wind driven turbo ventilators. Do not worry about noise from using motor. ● Dust-proof: do not have to wash the wind driven turbo ventilators. The sphere runs 24 hours, so dust does not adhere to thewind driven turbo ventilators easily. ● Natural light: light could shine inside from the crack between blades and blades. It would increase about 20% illumination to save the cost of electricity. Wind driven turbo ventilators are most choices to green buildings.  
2013-05-10
Installation diagram
  1.在屋頂欲安裝處開孔 2.將底座圓孔處和開孔處接合 3.底座的上端放入屋脊板下方,以自攻螺絲釘將底座四周固定後,再將底座四周及鎖    螺絲的部位塗上矽利康填縫膠,避免漏水情況產生 4.接著將中座與底座接合後,用水平尺將中座調整水平,已自攻螺絲釘固定, 5.最後將頭座以自攻螺絲釘固定即完成安裝步驟   溫馨叮嚀: 1.中座調整水平,可使頭座的耐用年限增長! 2.記得機所有鎖過螺絲釘的地方都塗上矽利康填縫膠,避免漏水哦! 1.  Drill a hole which is ready to install a wind driven turbo ventilator on the roof. 2.  Make the opening in the bottom connect a hole on the roof. 3.  Put top of the bottom to underneath of the ridge board. Use self drilling screws to fasten  the bottom.Then, put silicone around the bottom and the places of screws, in order to avoid water leakage. 4.  Make the middle part connect the bottom. Next, use spirit level to adjust the middle part,  and use self drilling screws to fasten the middle part. 5.  Finally, use self drilling screws to fasten the upper part.   Note: 1.  The useful life of the upper part could be much longer, through using spirit level to adjust the middle part. 2.  Please remember to put silicone on the places of screws so that preventing from  water leakage.
2013-05-10
WebDiY 網路開店 GO! 系統